DK324 Humilog ruggedPlus datalogger

The data loggers HumiLog "rugged" from the German brand Driesen + Kern are extremely robust compact data loggers for measuring and recording humidity and temperature up to + 140 ° C.
This logger is mainly used for process control eg in the food industry, pharma and medical applications.
The logger calculates the A0 value according to EN 15883-1 «Validation of cleaning and disinfection devices» (eg autoclaves)

The DK324 has integrated sensors and is equipped with a filter cap. This filter protects the sensor against dust and condensation.
The sensor is resistant to most chemicals and has a stability of less than +/- 1% RH / year.
The housing is made of shock-proof POM high-quality plastic, which protects the data logger under extreme conditions.
DK320 has an IP65 protection degree.
The 3 LEDs immediately indicate the status of the logger: Alarm limit exceeded, battery status, flashing LED indicates measurement status

* Robust data logger (IP65, shock-proof)
* Measuring range from -40 ° C to + 140 ° C
* High accuracy +/- 0.3 ° C and +/- 2% RH
* Stability better than +/- 1% RH / year
* Replaceable battery with a life of 4 years
* USB interface for fast data transfer
* Memory for 4 million measured values
* "Shaky Start" - Logger is started by shaking it
* Measured values ​​are retained even in the event of a battery failure
Supplied as standard with:
Data logger DK324 TempLog ruggedPlus, Software InfraLog basic, Lithium Battery, USB cable

Specifications:

Measuring range Temp -40 ... +140 ° C Moisture 0 ... 100% RH
Accuracy ± 0.3 ° C ± 2% RH
Resolution 0.01 ° C
Measuring interval 32 Hz to 24 h
Memory 4 Million Measurements
Buffer Ring buffer or stop when memory is full
Software InfraLog 5.0 basic / light / advanced (basic is supplied free of charge)
Waterproof IP65
Battery 3V Lithium Battery replaceable
Battery lifetime Depends on measurement interval (approx. 4 Years with Measurement interval of 1 min)
Applications -40 ° C to + 90 ° C (Lith12 battery)
Dimensions Ø 50 mm, H 30 mm
POM plastic housing